The Windows Ce Taskbar - Philips VELO500 User Manual

4 Double-tap the checkerboard to set the speed and area of
your double-tap.
5 Double-tap the clapper board to test your settings.
If you cannot select objects accurately with your stylus or if you
notice that the accuracy of the stylus has diminished over time,
you may need to record new calibration settings. You can use the
Stylus control panel to recalibrate the touch screen.
To recalibrate the touch screen
1 On the Start menu, point to Settings, and tap Control
Panel.
2 Double-tap the Stylus icon.
3 Tap the Recalibrate tab.
4 Press and briefly hold the stylus on the center of the
target each time it stops. It is important that the stylus
is the only thing touching the screen. Be careful not to
touch the screen with your fingers while calibrating.
5 Press the
key to cancel the settings and start over.
ESC
If you make a mistake when calibrating the touch screen or if,
over a period of time the accuracy of the touch screen diminishes,
you may not be able to navigate with the stylus. To open the
stylus calibration screen without using the stylus, simultaneously
press + +=, or press
CTRL ALT

The Windows CE taskbar

The Windows CE taskbar provides a quick way to switch between
programs and open documents. Each open document or running
program is shown as a button in the taskbar.
To switch to a program or document, tap the taskbar button.
To minimize the active program, tap the button for the active
program or document.
To minimize all programs and display the desktop, tap the
desktop icon at the right edge of the taskbar.
You can set several options for the taskbar, such as whether
the taskbar remains visible in all programs (Always on top and
Auto hide) and whether the clock is displayed (Show Clock).
key to accept the settings, or press the
ENTER
+ .
I
17