Philips VELO500 User Manual page 6

Philips Velo™ 500 User's Manual
Press the Power button to turn your Velo 500 on and off. If you
go several minutes without working on your Velo 500, it will
preserve your work and suspend itself, shutting off automatically.
Just press the Power button to start working again, right where
you left off.
The three indicator lights on the front of the Velo 500 call your
attention to various events:
The green recharging indicator light
Philips Velo Rechargeable Battery pack is being recharged.
The light turns off when charging is complete.
The red serial connection light
is connected to a desktop computer running Windows CE
Services and a software connection has been established.
The yellow alarm indicator light
an alarm you have set. This light stops blinking when
you tap
double-tap the alarm icon in the status area of the taskbar.
Backup battery
compartment
DRAM Miniature
Card slot
Figur Figur e 3: e 3: Bottom vie Bottom vie
Figur Figur Figure 3: e 3: e 3: Bottom vie Bottom vie Bottom view of
Figur Figur Figure 4: e 4: e 4: Side vie e 4: Side vie Side view of Side vie
Figur Figur e 4: Side vie
10
to close the alarm's dialog box or when you
Main battery
compartment
Connector to
V-Module
w of V V V V V elo 500 w of w of elo 500 elo 500
w of elo 500 elo 500
IR port
DC jack
w of w of w of V V V V V elo 500 (left side) elo 500 (left side) elo 500 (left side) elo 500 (left side)
w of elo 500 (left side)
is on while the
blinks when your Velo 500
blinks to indicate
Flash/ROM
Miniature
Card slot
Serial connector