Nokia ESB26 User Manual page 252

19. DHCP Client
Command Syntax
device-name(config)#dhcp-client save-config [on|off]
Displaying the DHCP Client Configuration
The show dhcp-client command, in Privileged (Enable) mode, displays the DHCP client
status and the DISCOVER message timeout.
Command Syntax
device-name#show dhcp-client
Example
device-name(config)#ip address dhcp
device-name(config)#exit
device-name#show dhcp-client
DHCP client is active
IP address is acquired by DHCP
DISCOVER messages retransmission timeout is infinite
Lease time left: 61
Displaying the Slot and Location
The show positioning command, in Privileged (Enable) mode, displays the chassis and slot
numbers of the switch.
NOTE
The chassis number is displayed in hexadecimal format.
Command Syntax
device-name#show positioning
Example
device-name#show positioning
Current system Slot 04 Location 2ea6s
MN700004 Rev 01 241