Nokia ESB26 User Manual page 399

36.
Address Bus Test: Walking One --> OK
Address Bus Test: Walking Zero --> OK
RAM Device Test : 100% --> OK
Entering into self-test switch mode. Please wait...
All ports --> OK
clear test-results
The clear test-results command, in self-test mode, clears the last self-test results.
Command Syntax
device_name(self-test)#clear test-results
Example
device_name(self-test)#clear test-results
device_name(self-test)#show test-results
CPU Core Test
Switch Core Test: Not performed
NVM Data Test
RAM Test
Ports Test
show test-results
The show test-results command, in self-test mode, displays all test results that have been
performed.
Command Syntax
device_name(self-test)#show test-results
Example
device_name(self-test)#show test-results
CPU Core Test
Switch Core Test: Passed
NVM Data Test
RAM Test
Ports Test
test end
The test end command, in Debug self-test mode, exits the Debug self-test mode that the
switch has been entered to after performing RAM or port tests, and returns to normal mode.
MN700004 Rev 01
Diagnostic Tests
: Not performed
: Not performed
: Not performed
: Not performed
: Passed
: Passed
: Passed
: Passed
388