Nokia ESB26 User Manual page 336

27.
Example 2
Use the brief option to display a summary of enabled indicators:
device-name#show monitor brief
On-board Power Test
Temperature Test
Port Statistics Test : Period 10 sec.
CPU Resources Test
RAM Resources Test
device-name#
device-name#show monitor temperature
Period
Traps
Log
Temperature limit
device-name#
Displaying a Specific Indicator's Configuration
The show command, in Monitoring Configuration mode, displays the current monitoring
configuration for a specific indicator.
You can also use the show monitor command in Privileged (Enable) mode.
Table 27-4 lists the default monitoring period values.
Command Syntax
device-name(config monitor INDICATOR)#show
Example
The following example shows the configuration settings for temperature monitoring:
device-name(config monitor temperature C)#show
Period
Traps
Log
Temperature limit
Displaying the Temperature
The show temperature command, in Privileged (Enable) mode, displays the current Celsius
(Centigrade) and Fahrenheit temperature at the unit's CPU area.
If the temperature reaches its higher limit (55°C or 131°F default), the switch can send an
SNMP trap to the trap destination.
Command Syntax
device-name#show temperature [
Argument Description
high-limit (Optional) Displays the highest allowed Celsius (Centigrade) and Fahrenheit
temperature at the unit's CPU area.
Example 1
device-name#show temperature
MN700004 Rev 01
Periodic Monitoring
: Period 60 sec.
: Period 20 sec.
: Period 10 sec.
: Period 30 sec.
: 20 sec.
: Enabled
: Enabled
: 55C
: 20 sec.
: Enabled
: Enabled
: 55C
high-limit
325
]