Nokia ESB26 User Manual page 355

31.
An NTP client can use up to a maximum of five servers. This requires the system
administrator to define the IP addresses of the desired NTP servers. The following commands
are used for adding, deleting and displaying NTP servers.
Description of Commands
time-server ntp add
The time-server ntp add command, in Global Configuration mode, adds a server to the NTP
server list.
Up to five NTP servers can be defined. The switch will try to connect the NTP servers
sequentially, in the order that they were inserted via the CLI.
Command Syntax
device-name(config)#time-server ntp add A.B.C.D
Argument Description
A.B.C.D
Example
The following example adds the NTP server with IP address 186.102.20.11.
device-name(config)#time-server ntp add 186.102.20.11
time-server ntp delete
The time-server ntp delete command, in Global Configuration mode, deletes the specified
server from the NTP server list.
Command Syntax
device-name(config)#time-server ntp delete A.B.C.D
Argument Description
A.B.C.D
Example
The following example deletes the NTP server with IP address 186.102.20.11.
device-name(config)#time-server ntp delete 186.102.20.11
time-server ntp show
The time-server ntp show command, in Global Configuration mode, displays the IP
addresses of the currently defined NTP servers.
MN700004 Rev 01
NTP Client Description
IP address of NTP server providing clock synchronization.
IP address of NTP server to be deleted.
344