Nokia ESB26 User Manual page 419

device_name(config)#mac-address 00:a0:12:07:0f:78
New MAC Address of switch = 00:A0:12:07:0F:78
clean startup-configuration
The clean startup-configuration command, in Sysloader Configuration mode, erases the
Startup configuration file saved in internal Flash memory.
Command Syntax
device name(config)#clean startup-configuration
clean java
The clean java command, in Sysloader Configuration mode, erases the Java image saved in
internal Flash memory.
Command Syntax
device name(config)#clean java
clean boot-config
The clean boot-config command, in Sysloader Configuration mode, clears the Sysloader
EEPROM.
NOTE Only Technical Support should use this command.
Command Syntax
device name(config)#clean boot-config
clean log-history
The clean log-history command, in Sysloader configuration mode, erases all the log history
records.
For more information regarding the log history, see "Logging System Trap-Messages to the
NVRAM"
Command Syntax
device name(config)#clean log-history
boot-mode
The boot-mode command, in Sysloader configuration mode, sets the boot mode to primary,
secondary or auto.
By default, the boot mode is primary. For more information regarding the boot mode, see
"Software Upgrade and Reboot Options"
Command Syntax
device name(config)#
MN700004 Rev 01
APPENDIX
Loader, Sysloader and Dual Boot
boot-mode (primary|secondary|auto)
XIV