NEC 1232 AK Series Operation Manual page 71

To record a VAU Message:
(Extension No.10 only)
Note: Ask your supplier for which types of message you should record in Message No. 01-25.
To erase a VAU Message:
(Extension No.10 only)
To confirm a VAU Message:
(Extension No.10 only)
1. Lift handset or press
2. Dial 9 3 0
- If Busy, voice paths may be occupied, or user operates
at extension other than #10.
3. Dial VAU Message No. (01-25) (See Note)
4. Dial . (Recording and timer counting start.)
∗
5. Record a message from handset or microphone.
- If Busy; user dials Message No. other than specific No.
6. Dial . (Recording and timer counting finish.)
∗
Return to Step 3.
- If user dials "#" instead of " ∗ ", recording contents will
not be recorded and Dial Tone may be sent.
SPK
7. Hang up or press
- When user hangs up or presses SPK without dial ∗ or #,
the recorded message will be saved.
- When 16 sec. has passed during message recording,
timer counting will automatically be finished and the
recorded message will be saved.
1. Lift handset or press
9 3 1
2. Dial
- If Busy, VAU unit is not inserted in the system., or
user operates at extension other than #10.
3. Dial VAU Message No. (01-25).
∗
4. Dial . (VAU Message is erased.)
When erasing finished, Dial Tone may be sent.
- If Busy, user dials Message No. other than specific No.
SPK
5. Hang up or press
1. Lift handset or press
9 3 2
2. Dial
- If Busy, Voice Paths may be occupied, or user operates
at extension other than #10.
3. Dial VAU Message No. (01-25).
- If user dials VAU Message No. which was not recorded,
Dial Tone may be sent.
4. Dial ∗ .
5. Playback the message from handset or built-in speaker.
- If Busy, user dials Message No. other than specific No.
- When recorded contents has been finished, 1-beep tone
will be sent.
After confirmed, return to Step 3.
SPK
6. Hang up or press
Other Features
SPK
.
.
.
SPK
.
.
.
SPK
.
.
.
65