Viewing Incoming Caller-Id Information; Caller-Id Information Display - NEC 1232 AK Series Operation Manual

Viewing Incoming Caller-ID Information

When the system receives an incoming call with Caller-ID information, you can view it on your phone's
display manually or automatically depending on the types of call.
To view Caller ID Information:
8137101
INFRONTIA CORP
(Display Example)
THU 27 15:20PM
10
8137101
INFRONTIA CORP
(If number and name are received)
8137101
15 : 20

Caller-ID Information Display

Information Received
Name/Number
Number
Name
No Caller-ID information
Caller blocks information
Call from Non Caller-ID
service area
Note:
• Caller-ID information of outside calls on hold can be shown by pressing FLASH key + pressing flashing
Line key (or just pressing flashing Line key).
• Pressing CHECK key during Automatic Caller-ID Displaying does not show further information.
Outside call that rings your phone
Caller-ID information of the incoming call is shown on your
phone display automatically without any operation.
If the system disables Automatic Caller-ID Displaying, the
operations same as Outside call that just flashes a Line key
without ringing are required.
Outside call that just flashes a Line key without ringing
(On-hook condition)
1. Press
- This operation may not be required if your phone is
2. Press flashing
3. Press
27/08/98
Display Shows:
number
name
number
time/date
NO NUMBER INFO
name
line number
NO CALLER INFO
line number
UNAVAILABLE INFO
line number
PRIVATE
line number
OUT-OF-STATE
line number
OUT OF AREA
key.
FLASH
programmed as "non-Single Step Access" extension.
Contact your supplier for details.
key.
LINE
key to display further information (if available).
CHECK
Display After Pressing
number
time/date
number
time/date
NO NUMBER INFO
time/date
line number
NO CALLER INFO
line number
UNAVAILABLE INFO
line number
PRIVATE
line number
OUT-OF-STATE
line number
OUT OF AREA
Other Features
CHECK
55