Dial Block - NEC 1232 AK Series Operation Manual

Dial Block

If you are going to be away from your desk, you can temporarily program your phone to block outgoing
calls. If this option is enabled for you, just enter a four digit personal code. If this 4-digit personal code is
forgotten, it can be erased by the extension #10 by entering a special password.
When Dial Block is activated anyone trying to place a Trunk call will hear an error tone and the line will be
disconnected.
To cancel Dial Block:
To set Dial Block:
1. Press
2. Press
3. Dial
4. Dial 4-digit personal code.
5. Dial
6. Press
1. Lift handset.
2. Dial 055 or 955.
3. Dial 4-digit personal code.
4. Replace handset.
1. Press
2. Press
3. Dial
4. Dial 4-digit code which is entered when setting Dial
5. Dial
1. Lift handset.
2. Dial 056 or 956.
3. Dial 4-digit personal code which is entered when setting
4. Replace handset.
Trunk Outgoing Call
SPK
key.
ICM
key.
∗ #
.
- You can dial any number as personal code.
∗
.
- Confirmation tone when effective.
- Error tone when not effective.
SPK
key.
- You can dial any number as personal code.
SPK
key.
ICM
key.
.
∗ #
Block.
.
#
- Confirmation tone when effective.
- Error tone when not effective.
Dial Block.
9