Code Restriction, Dial Block - NEC Electra Elite IPK II System User Manual

Electra Elite IPK II
Description
Code Restriction-Dial Block lets a user temporarily block an extension Code Restriction. This helps a
user block his or her phone from being used by another person while they are away from their desk. A
user needs to enter a 4-digit personal code to enable/disable this feature.
Dial Block can be set also by the supervisor's access code. If Dial Block was already set by an extension
user, the supervisor cannot release it. If Dial Block is set by the supervisor's code, the extension user
cannot release it.
Important: This function works by password and Class of Service control (the supervisor is not an
assigned extension). If Dial Block is available for all Classes of Service, everyone may become a
supervisor if they know the Dial Block password.
Conditions
If the system is reset by a first initialization, the Dial Block feature is cleared.

This feature is not available for ISDN S-Bus extensions.

Both PRGs 21-09-01 (Code Restrict Class) and PRG 21-10 (Dial Block Restriction Class

per Extension) can be set at the same time.
The system gives priority to the setting in Program 20-10.

Dial Block can temporarily block an extension Code Restriction setting by changing to a

predefined table that has more restrictions.
Default Settings
Disabled
System Availability
Terminals:
None

Code Restriction, Dial Block

Code Restriction, Dial Block
Document Revision 4C
2 - 239