NEC Electra Elite IPK II System User Manual page 867

Electra Elite IPK II
Voice Over
Programming

15-07-01 Programmable Function Keys
Assign a function key for Reverse Voice Over (code 47 + destination extension).
Assign a function key for Voice Over to the destination extension (code 48). This allows the user
at the destination to switch between calls if they were busy when the Reverse Voice Over was
initiated.

20-13-06 Class of Service Options (Supplementary Service) – Automatic Off-Hook Signaling
(Automatic Override)
Define whether a busy extension Manually (0) or Automatically (1) receives Off-Hook signals.
(default: 1)

20-06-01 Class of Service for Extensions
Assign a Class of Service (COS) to each extension (1~15).
Operation
When on a call:
To place a Reverse Voice Over call:
1. Press your Reverse Voice Over key (PRG 15-07 or SC 751: 47 + destination extension).
Your Reverse Voice Over key lights steadily (red) and you can talk with the programmed Reverse Voice Over

destination.
To receive a Reverse Voice Over Call while busy:
1. Press the Voice Over key (PRG 15-07 or SC 751: 48).
The voice over key allows you to switch back and forth between the initial call and the Reverse Voice Over Call.

To return to your initial caller:
1. Press the Reverse Voice Over key again.
If the co-worker you call hangs up, you return to the initial call automatically.

Reverse Voice Over
Document Revision 4C
2 - 843