NEC Electra Elite IPK II System User Manual page 381

Electra Elite IPK II
Central Office Calls, Answering
Central Office Calls, Placing
Door Box
Night Service
One-Touch Calling
Paging, External
Paging, Internal
Programmable Function Keys
Speed Dial – System/Group/Station
Programming

10-03-01 ETU Setup – ESI Terminal Type (B1)
The system automatically assigns the terminal type (10) for the port which has a DSS console
installed.

15-02-08 Multiline Telephone Basic Data Setup – Automatic Handsfree
Set to 1 for a DSS Console to have one-touch operation. If set to 0, the user needs to lift the
handset before pressing a DSS key for the call to complete.

20-06-01 Class of Service for Extensions
Assign Class of Service (1~15) to extensions.

20-13-06 Class of Service Options (Supplementary Service) – Automatic Off-Hook Signaling
(Automatic Override)
Allow a busy extension user to manually (0) or automatically (1) receive off-hook signals.

20-13-49 Class of Service Options (Supplementary Service) – BLF Indication on CO Incoming State
(Version 1600 or higher required)
Turn Off (0) or On (1) the BLF Indication when a Ring Group call rings a station. This
assignment does not apply to single line telephones.

20-17-01 Operator Extension – Operator's Extension Number
Define the extension numbers used as operators.

30-01-01 DSS Console Operating Mode
Set the system DSS Consoles mode. The available options are Business Mode (0), Hotel Mode
(1), and ACD Monitor Mode (2). Default is 0.
Direct Station Selection (DSS) Console
Document Revision 4C
2 - 357