NEC Electra Elite IPK II System User Manual page 472

Document Revision 4C
Program
11-20-01 Dial Extension Analyze Table
(Version 2000 or higher required)
11-20-02 Dial Extension Analyze Table
(Version 2000 or higher required)
11-10 Service Code Setup (for System Administrator)
11-11 Service Code Setup (for Setup/Entry
Operation)
11-12 Service Code Setup (for Service Access)
11-13 Service Code Setup (for ACD)
11-14 Service Code Setup (for Hotel)
11-15 Service Code Setup, Administrative (for
Special Access)
11-16 Single Digit Service Code Setup
Conditions
Programming follows a telephone extension number, not the port number in most cases. If

you relocate a telephone, you may need to change additional programming.
If the extension numbering plan is changed from 3xx to 2xx, and you want to consecutively

press two DSS keys without toggling the hookswitch, Program 11-16-05 must be removed.
If not, press the second DSS key to actually camp you on to the first extension.
Since making changes in Program 11-01 does not automatically make any changes in any

other program, changing the number plan after the system is in operation may cause
problems in the following programs:
11-02
11-04
11-06
11-07
2 - 448
Flexible System Numbering (Continued)
PRG 11-01 Type 2
(Extension Number)
11-08 15-12
11-17 16-01-01
15-01-01 15-14
15-07 21-11
Description
Use tables 01 ~ 128 to assign the digits to be dialed using
the Dial Extension Analyze Tables. These tables are used
when Program 11-01-01 is set to option 9 = Dial Extension
Analyze.
(Up to eight digits can be assigned and the valid entries are:
# ,
0, 1 ~ 9, , )

Assign the Type of Dial for the Dial Extension Analyze Table
from Program 11-20-01.
(Svc Code, Intercom, Operator, or F-Route)
Customize the Service Codes.
Assign the Single Digit Service Code. This is the
post-dialing code a user can dial after placing an
Intercom call to a co-worker.
PRG 11-01 Type 1
(Service Codes)
22-11 11-10
25-06 11-11
30-03 11-12
11-13
Electra Elite IPK II
11-14 21-11
11-15 30-03
15-07
15-14
Flexible System Numbering