NEC Electra Elite IPK II System User Manual page 582

Document Revision 4C
To Configure an IP Terminal for Center Download
1. Access IP Terminal Programming
2. Select Option 9 – Advance Setting and select sub-menu Option 3 – DRS Setting.
You are required to enable DRS Mode to support this feature.

3. Select Option 1 – DRS Mode.
4. Press 2 – DRS Enable.
The Dterm Registration Server (DRS) settings is supported by the Elite IPK II (Center
Download) feature only. This setting should be enabled only if IP Phones and
PVA(X)-U10 exist in the same IP Subnet. This setting does not support IP Phones
residing on a different IP Subnet and must be disabled.
Reference the Elite IPK II Feature and Specifications Manual for Center Download
feature.
5. Select the Set softkey.
6. Select Option 2 – Primary DRS Address (enter the IP Address of the MG16 Card) the extension
you want to override.
7. Press the Set and Save softkeys. DRS Listening Port = 161.
The extension number entered should be a registered IP Phone .

2 - 558

Hold + Transfer +
Caution
+ .
#

IP Station (MEGACO) – MG 16
Electra Elite IPK II