NEC Electra Elite IPK II System User Manual page 832

Document Revision 4C
System Availability
Terminals
Any Station
Required Component(s)
None
Related Features
Central Office Calls, Placing
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Direct Inward System Access (DISA)
Line Preference
Programming

14-05-01 Trunk Group – Trunk Group Number
Assign Prime Line to a separate trunk group for outgoing Prime Line selection. (Also refer to
PRG 14-06 and PRG 21-02.)

14-06-01 Trunk Group Routing – Priority Order Number
Set up outbound route for trunk group that contains the Prime Line. (Also refer to PRG 14-05
and PRG 21-02.)
Trunk Group Routing: 1~100

14-07-01 Trunk Access Map Setup – Trunk Port Number
For outgoing Prime Line selection, assign each Prime Line trunk to a different Access Map and
deny outbound access to all trunks except the Prime Line trunk.
Trunks: 1~200

15-01-02 Basic Extension Data Setup – Outgoing Trunk Line Preference
Enter 1 for this option so extension user seizes Prime Line when they lift the handset.
2 - 808
Electra Elite IPK II
Prime Line Selection