NEC Electra Elite IPK II System User Manual page 607

Electra Elite IPK II

84-05-01 VoIP IP Address – IP Address
Define the IP Address of the VoIP Application supported (MG16, CCISoIP).
(default: Slot 1: 172.16.0.20)

84-05-02 VoIP IP Address – LAN Interface
Define the LAN interface Speed and Mode of the VoIP Application supported (MG16, CCISoIP).
(default: 0 = AUTO)

84-05-04 VoIP IP Address – Subnet Mask
Define the Media Gateway Card Subnet Mask Address.
(default: 255.255.0.0)

84-05-05 VoIP IP Address – Default Gateway
Define the MG16 Application Default Gateway Address.
(default: 0.0.0.0)

84-06-01 VoIP Info – RTP Port Number
Define the Media Gateway Card starting RTP Port Number.
(default: 10020)

84-06-02 VoIP Info – RTCP Port Number
Define the Media Gateway Card Starting RTCP Port Number. The RTCP Port Number is the
RTP port number + 1.
(default: 10021)

84-06-04 VoIP Info – Fract Lost Threshold
Define the fractional lost threshold – this data is sent to the IPK II CPUII when the value exceeds
the defined value.
(default: 0)

84-06-05 VoIP Info – Packets Lost Threshold
Define the packet lost threshold – this data is sent to the IPK II CPUII when the value exceeds
the defined value.
(default: 0)

84-06-07 VoIP Info – Jitter Threshold
Define the Jitter Threshold – this data is sent to the IPK II CPUII when the value exceeds the
defined value.
(default: 0)

84-06-09 VoIP Info – Delay LSR Threshold
Define the Delay threshold – this data is sent to the IPK II CPUII when the value exceeds the
defined value.
(default: 0)
VoIP ToS Setup
The Elite IPK II supports QoS Marking for the ToS and DiffServe on the following VoIP Applications: (MG16 and
.
CCISoIP packages)
IP Trunk (SIP) – MG16
Document Revision 4C
2 - 583