NEC Electra Elite IPK II System User Manual page 132

Document Revision 4C
Operation
To place an outgoing call on hold and retrieve it using a multiline terminal:
1. Use the handset to go off-hook, and wait for internal dial tone.
- OR -
Press Speaker and wait for internal dial tone.
2. Dial the Trunk Access Code (default: 9).
3. Dial the outside party (the Call Appearance key lights). Begin your conversation.
4. Press Hold (the Call Appearance key flashes).
5. Press the flashing Call Appearance key to retrieve the call.
To receive an incoming call, put it on hold and then retrieve it using a Multiline Terminal:
1. Receive CO/PBX incoming ring.
2. Use the handset to go off-hook, or press Speaker (the Call Appearance key lights). Talk with
outside party.
3. Press Hold (the Call Appearance key flashes).
4. Press the flashing Call Appearance key to retrieve the call.
2 - 108
Electra Elite IPK II
Call Appearance (CAP) Keys