NEC Electra Elite IPK II System User Manual page 951

Electra Elite IPK II

35-01-03 SMDR Options – Header Language
Specify the language in which the SMDR header should be printed.
Languages:
0 = English (default)
1 = German
2 = French
3 = Italian
4 = Spanish

35-01-04 SMDR Options – Omit Digits
Enter the number of digits (1~24) you want SMDR to block (i.e., X out). Enter 0 not to block any
digits.
(default: 0)

35-01-05 SMDR Options – Minimum Digits
Enter the minimum number of digits a user must dial (1~24) before the system includes a call on
the SMDR report. Enter 0 to include all outgoing calls, regardless of the number of digits dialed.
(default: 0)

35-01-06 SMDR Options – Minimum Call Duration
Enter the minimum duration of a call (0~65535 seconds) that prints on the SMDR report. Enter
0 to have calls of any duration print.
(default: 0)

35-01-07 SMDR Options – Minimum Ring Time (For Incoming Calls)
Enter how long an unanswered call must ring (0~65535 seconds) before SMDR logs it as No
Answer). Enter 0 to allow all No Answer calls to print.
(default: 0)

35-01-08 SMDR Options – Format Selection
Do not change:
This option is added to allow an increased account code field from 8 to 16 when used in the U.K.
This allows 16 characters of the Caller ID name to be displayed. For the U.S., this option is set to
0 and should remain at this setting as 16 characters are already provided for the account code
field.
(default: 0)

35-02-01 SMDR Output Options – Toll Restricted Call
Enter 1 if you want the SMDR report to include calls blocked by Toll Restriction. Enter 0 to
exclude blocked calls.
(default: 1)

35-02-02 SMDR Output Options – PBX Calls
If system is behind a PBX, enter 1 to have SMDR include all calls to the PBX. Enter 0 to have
SMDR include only calls dialed using PBX trunk access code.
(default: 1)
Station Message Detail Recording
Document Revision 4C
2 - 927