NEC Electra Elite IPK II System User Manual page 586

Hide thumbs Also See for Electra Elite IPK II System:
Table of Contents

Advertisement

Document Revision 4C
IPK II SIP supports HOLD and TRF feature on the basis of
draft-ietf-sipping-service-examples-09.txt
draft-ietf-sipping-cc-transfer-05.txt
draft-ietf-sip-session-timer-10.txt
When all VoIP DSP resources are busy, the SIP phone cannot pre-empt active calls
to make a 911 call.
The Elite IPK II CPU is the registration server for the SIP stations. The configurable IP
Address is located in PRG 10-12-01 (IPK II Network Setup – IP Address).
Version 1600 does not support Program 10-03-01: MG/CCIS PKG – Logical Port Number
of CCIS over IP.
PVA Combo Card Service Conditions
Version 2000 or higher is required to support the PVA Combo Card Application.
The PVA Combo Card Application can support 24 DSP resources which may be configured
to support the MG16 or the CCISoIP application.
The PVA Combo Card CCISoIP Trunks and SIP Trunks Logical Port Numbers are
determined by the following:
SIP Trunks
CCISoIP Trunks
The PVA(X)-U( ) ETU with PVA Combo Card Application may configure DSP usage criteria
with Elite IPK II Program 10-19-01 DSP Resources. Each VoIP ETU can flag individual
DSP resources as:
IP Ext – IP Extensions (includes MEGACO Station or SIP Stations)
SIP Trk – SIP Trunks
CCIS – CCIS Networking
Common – Common usage for CCIS Networking, SIP Station, MEGACO Stations, SIP Trunks
2 - 562
PVA(X)-U( ) ETU License Registration
SIP Client License Registration
Elite IPK II Program 10-41-01 SIP Trunk Availability
Elite IPK II Program 10-40-02 Number of SIP Ports
PVA(X)-U( ) ETU License Registration
Elite IPK II Program 10-40-03 CCISoIP Trunk Availability
Elite IPK II Program 10-40-04 Number of CCISoIP Ports
The maximum number of Logical Trunk Ports is 48 ports per PVA Combo Card package
Electra Elite IPK II
draft.
IETF
IP Station (SIP) – MG16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents