NEC Electra Elite IPK II System User Manual page 588

Document Revision 4C
System Availability
Terminals
SIP Terminals Compliant with RFC 3261, RFC 3262, RFC 3264 (Session Description Protocol),
RFC 1889 (Real Time Protocol).
PVA(X)-U20 ETU with MG16 Application Package 1.51 or higher.
IPK II CPU Release 1.50 or higher.
PVA(X)-U( ) ETU with PVA Combo Application Package 1.00 or higher and Elite IPK II CPUII
Version 2000 or higher.
Related Features
None
Programming
VoIP Settings:
When the PVA(X)-U( ) ETU is first purchased it has a factory default package installed. You must load
the MG16 Application for the Elite IPK II KSU to recognize the VoIP MG16 ETU. [Reference the
PVA(X)-U( ) ETUs Firmware upgrade installation procedure].

10-19-01 VoIP DSP Resource Selection (Version 1600 or higher required)
Select type of VoIP ETU DSP Resource. This program setting has no affect on the terminal/
trunk port assignment or usage.
Entries: 0 = Common (Used for both IP Extensions and Trunks), 1 = Extension, 2 = Trunks, 3 =
Networking
(Default: 0)

10-26-01 IP System Operation Setup – Peer to Per Mode (Version 1600 or higher required)
0 = Off
1 = On
(default: 1)

10-26-03 IP System Operation Setup – SIP Peer to Per Mode (Version 1600 or higher required)
0 = Off
1 = On
(default: 1)
2 - 564
Electra Elite IPK II
IP Station (SIP) – MG16