NEC Electra Elite IPK II System User Manual page 298

Document Revision 4C
Virtual Extensions
Programming

14-07-01 Trunk Access Map Setup
Set up the Trunk Access Maps. This sets the access options for trunks. Ring Group
programming overrides Access Map programming.
Trunk Access Maps: 1~200

15-06-01 Trunk Access Map for Extensions
Assign Trunk Access Maps to extensions.
Trunk Access Maps: 1~200 (default: 01)

15-07-01 Programmable Function Keys
Assign CAR/SIE/VE function keys (code
01 + trunk port) on multiline terminals.


15-09-01 Virtual Extension Ring Assignment
Individually program an extension Virtual Extension key(s) to either ring (1) or not ring (0).

15-11-01 Virtual Extension Delayed Ring Assignment
Individually program an extension Virtual Extension key(s) for Delayed Ringing (1) or Immediate
Ringing (0).

20-04-03 System Options for Virtual Extensions – CAR/SIE/Virtual Extensions Delay Interval
CAR/SIE/VE set for Delayed Ringing (Program 15-11-01) rings the covering extension after this
interval. (0~64800 seconds). (default: 10).

22-01-04 System Options for Incoming Calls – DIL No Answer Recall Time
If an incoming trunk call rings longer than this time, it reroutes to the Ring Group set in Program
22-08-01. (0~64800 seconds). (Default: 0).

22-02-01 Incoming Call Trunk Setup
Assign the incoming trunk type for each trunk.

22-08-01 DIL/IRG No Answer Destination
If an incoming trunk call rings longer than the DIL No Answer Time (Program 22-01-04), it routes
to the destination you specify in this option. Determine if the destination should be a Ring Group,
In-Skin/External Voice Mail, or Central Voice Mail.
Ring Groups: 1~100 (default: 1)
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
2 - 274
03 + extension number) or CO function keys (Code

Electra Elite IPK II
Delayed Ringing