NEC Electra Elite IPK II System User Manual page 166

Document Revision 4C
To cancel Call Forwarding Off-Premise for a Door Box:
1. At the multiline terminal, press Speaker + dial SC 722.
- OR -
At the multiline terminal only, press Call Forward (Device) key (PRG 15-07-01 or SC 751, code 54).
- OR -
At the single line telephone, lift the handset + dial 722.
2. Dial 0 (Cancel).
Trunk-to-Trunk Forwarding
Set the Destination and Forward the Line:
1. Lift the handset.
2. Dial 735.
3. Dial trunk port number (001~200) to be defined.
4. Select the mode (1~8) to be defined.
5. Enter the telephone number, which is the destination of the forwarded trunk.
The number is stored in the Speed Dial bin number assigned in Program 24-04-01. This entry overwrites any

existing number defined in the bin.
6. Press Hold to accept the entry.
7. Repeat from Step 3 to define another mode entry or press Speaker to hang up.
Cancel the Line Forwarding:
1. Lift the handset.
2. Dial 735.
3. Dial trunk port number (7 001~200) to be defined.
4. Select the mode (1~8) to be defined.
5. Press the Exit key.
6. Press Speaker to hang up.
Automatic Trunk-to-Trunk Transfer (Step Transfer) (follows the predefined destination in
Program 24-04-01) Set Automatic Trunk Forwarding:
 The Speed Dial bin must be defined in PRG 13-04-01 for the line to forward.
1. Lift the handset.
2. Dial 733.
2 - 142
Electra Elite IPK II
Call Forwarding, Off-Premise