NEC Electra Elite IPK II System User Manual page 341

Electra Elite IPK II
If PRG 15-02-26 = 1 (Voice Mail Key):
1. Press the Message key once.
The voice mail is called.

When there are new messages, the MW LED on the telephone flashes red.

With this option set, the MSG key can be used as a Voice Mail key for any function calling voice mail or

transferring a call to voice mail (Hold + MSG + Extension Number).
Leaving A Message (Multiline Terminal Only)
To leave a message in the mailbox of an unanswered extension: (the extension you call can be busy, in
DND or unanswered)
1. Press the Voice Mail key (PRG 15-07 or SC 751: code 77)
- OR -
Dial 8.
The Voice Mail system prompts you to leave a message.

Forwarding Calls to your Mailbox
To activate or cancel Call Forwarding:
1. Press Speaker (or lift the handset at the single line telephone) and choose from the following dial
access codes:
741 = Call Forward – Immediate
742 = Call Forward – Busy
743 = Call Forward – No Answer
744 = Call Forward – Busy/No Answer
745 = Call Forward – Both Ring
746 = Call Forwarding – Follow Me
2. Dial the Voice Mail master number.
3. Press Speaker to hang up (or hang up handset at the single line telephone).
Your DND or Call Forwarding (Station) key flashes when Call Forwarding is activated.

Transferring Calls to a Mailbox
To Transfer your active call to a mailbox:
Multiline Terminal
1. Press Hold.
Digital Voice Mail
Document Revision 4C
2 - 317