NEC Electra Elite IPK II System User Manual page 614

Document Revision 4C

84-14-09 SIP Trunk Basic Information Setup – Called Party Information
Set the Called Party Information.
Entries: 0 = Request URI, 1 = To Header
(Default: 0)
SIP Server Information Setup

10-29-01 SIP Server Information Setup – Default Proxy (Outbound)
Define the SIP Proxy setup, Default Proxy (Outbound). When SIP trunking is used, set this to 1
(On).
If entries are made in Program 10-29-xx for an SIP Server and the SIP Server is then removed or not used,

the entries in Program 10-29-xx must be set back to their default settings. Even if PRG 10-29-01 is set to 0
(Off), the Electra Elite IPK II still checks the settings in the remaining 10-29 programs.

10-29-02 SIP Server Information Setup – Default Proxy (Inbound)
Turn Off (0) or On (1) the Default Proxy (Inbound).
(Default: 0)

10-29-03 SIP Server Information Setup – Default Proxy IP Address
Enter the default Proxy IP Address if the SIP carrier is using an IP address for the proxy. In most
cases, this is left at the default entry as the domain name is used.
Entries:
0.0.0.1 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.225.255.254
(Default: 0.0.0.0)

10-29-04 SIP Server Information Setup – Default Proxy Port Number
Define the Proxy Port Number (0~65535).
(Default: 5060)

10-29-12 SIP Server Information Setup – Domain Name
Define the Proxy Domain Name (Electra Elite IPK II domain name).
Entries: 64 characters maximum
(Default: None)

10-29-13 SIP Server Information Setup – Proxy Host Name
Define the Proxy Host name (Electra Elite IPK II proxy name).
Entries: 48 characters maximum
(Default: None).
SIP Registar Setup

10-29-05 SIP Server Information Setup – Registrar Mode
Define the Registrar Mode. Always set this to 1 when using SIP trunking.
Entries: 0 = None, 1 = Manual
(Default: 0)
2 - 590
Electra Elite IPK II
IP Trunk (SIP) – MG16