NEC Electra Elite IPK II System User Manual page 650

Document Revision 4C
MEGACO Station Card Scenarios
Optional Device Configurations
Network Equipment
IPK HUB ETU/HUB
SNMP switch (Bridge MIB and Mirroring)
SNMP switch (Bridge MIB – No
Mirroring)
Non-SNMP enabled switch (Mirroring)
Non-SNMP enabled switch (No
Mirroring)
MEGACO Station Card Scenarios
Optional Device Configurations
Network Equipment
HUB
HUB
SNMP switch (Bridge MIB and Mirroring)
SNMP switch (Bridge MIB and Mirroring)
SNMP switch (Bridge MIB – No
Mirroring)
SNMP switch (Bridge MIB – No
Mirroring)
Non-SNMP enabled switch (Mirroring)
Non-SNMP enabled switch (Mirroring)
Non-SNMP enabled switch (No
Mirroring)
Non-SNMP enabled switch (No
Mirroring)
The IVM should always be optimally positioned where it can monitor a majority of the telephone traffic.

Active tests can be performed only between switches that are configured to be managed by an IVM appliance. When the Discovery

process is unsuccessful, only schedule-triggered Active Tests can be performed between these switches.
When there is an IVM at the MEGACO site, but not at the remote site, calls from the remote are recorded under the MEGACO

Station Card, but no summary reporting for the individual telephones at the remote site is provided. The IP address of the remote
telephones is displayed on the MEGACO Station call records.
2 - 626
Features Summary (Main Site)
IVM Discover Monitor
Main Phones Phones
YS NO NO
YS YS YS
YS YS NO
YS NO NO
YS NO NO
Features Summary (Remote Site)
IVM Discover Monitor
Main Phones Phones
YS NO NO
NO NO NO
YS YS YS
NO NO NO
YS YS NO
NO NO NO
YS NO NO
NO NO NO
YS NO NO
NO NO NO
Electra Elite IPK II
Monitor Perform
Station Active
Notification
Card Tests
NO YS
YS YS
NO YS
NO YS
NO YS
Monitor Perform
Station Active
Notification
Card Tests
N/A YS
N/A NO
N/A YS
N/A NO
N/A YS
N/A NO
N/A YS
N/A NO
N/A YS
N/A NO
IPK II VoIP Management System
NO
YS
NO
NO
NO
NO
NO
YS
NO
NO
NO
NO
NO
NO
NO