NEC Electra Elite IPK II System User Manual page 580

Document Revision 4C
The following menu items require programming in your IP Phone:
Program/
Description/Selection
Item No.
1
2
3
4 Default Gateway
5
6
7
8
2 - 556
Network Setting
IP Address
Subnet Mask
Speed & Duplex
MGC Address
EXT
IP Address
Default Assigned Data
DHCP Disable
0.0.0.0
0.0.0.0
0.0.0.0
Auto
0.0.0.0
0
0
Electra Elite IPK II
Comments
Enter a Static IP Address for the IP
Phone.
Enter the subnet Mask Address.
Enter your Default Gateway address.
Enter the Media Gateway Controller IP
Address.
When Multiple MG16 ETUs are entered

only the MG16 configured as MASTER in
Program 84-05-03 is set as MGC IP
Address.
Assign the IP Phones extension. This
information must match Program
11-02-01 Extension Numbering.
Extension must be manually defined.
Auto setting is not supported.
Overriding an IP telephone must be
done through phone programming.
IP Station (MEGACO) – MG 16