NEC Electra Elite IPK II System User Manual page 186

Document Revision 4C
Required Component(s)
None
Related Features
Callback
Off-Hook Signaling
Programmable Function Keys
Transfer
Trunk Queuing/Camp On
Programming

11-11-23 Service Code Setup (for Setup/Entry Operation) – Second Call for DID/DISA/DIL
Enable Second Call to each extension when PRG 20-09-01 (Second Call) is set to 0 (disable).
(default: 679)

11-12-04 Service Code Setup (for Service Access) – Set Camp-On
Customize the Service Code used for setting Camp-On.
(default: 750)

11-12-05 Service Code Setup (for Service Access) – Cancel Camp-On
Customize the Service Code used for cancelling Camp-On.
(default: 770)

11-12-47 Service Code Setup (for Service Access) – Call Waiting Answer/Split Answer
If required, change the code users dial to Split while on a call. This code is normally 794.

11-16-05 Single Digit Service Code Setup – Camp-On
Customize the 1-digit Service Code used for setting Camp-On.
(default: #)

15-02-06 Multiline Telephone Basic Data Setup – Hold Key Operating Mode
Set the function of the extension Hold key.
0 = Normal Common (default)
1 = Exclusive Hold
2 - 162
Electra Elite IPK II
Call Waiting/Camp-On