NEC Electra Elite IPK II System User Manual page 250

Document Revision 4C

20-02-07 System Options for Multiline Telephones – Time and Date Display Mode
Select the display mode (type 1~8) for Time and Date (i.e., time and date format).

20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.

20-07-03 Class of Service Options (Administrator Level) – Time Setting
Enable (1)/Disable (0) an extension user ability to set the Time.

99-01-16 System Clock Adjustment
If for any reason the system clock loses or gains time, the system can automatically adjust the
system clock every midnight using this program.
This program is available only through telephone programming.

No other programs in 99-01-xx should be adjusted. Leave all other entries at their default setting. This

program is only available through telephone programming.
0 = No adjustment (default)
1~127 = seconds to be added to clock
128~255 = seconds to be backed up on the clock (-128 to -1 seconds)
Operation
The date must be set in system programming (10-01).
To set the system Time:
1. Press Speaker.
2. Dial 728.
3. Dial two digits for the hour (24 hour clock, 13 = 1:00 PM).
4. Dial two digits for the minutes (00~59).
5. Press Speaker to hang up.
2 - 226
Electra Elite IPK II
Clock/Calendar Display