Programming From A Multiline Terminal - NEC Electra Elite IPK II System User Manual

Electra Elite IPK II

Programming from a Multiline Terminal

Enhancements
Version 1100 or higher provides a temporary license (10 days) for the following: ACD, CTI, firmware upgrade,
Hotel/Motel, 256 MEGACO stations and SMDR.
Description
System Programming can be performed from any display multiline terminal. Most programming
changes become effective immediately. Other programming changes become effective after the data is
backed up from temporary memory to permanent memory.
Enhancements
Version 1100 or higher provides Temporary Licensing. Features that require a license before they can
function can be licensed temporarily for up to 10 days. The temporary license turns on ACD, CTI,
Firmware Upgrade, Hotel, 256 MEGACO stations, and SMDR.
Conditions
You can have up to two telephones in programming mode anytime.

You can have a maximum of four users logged into WebPro anytime.

You can have four WebPro users and two phone programming users logged in at the same

time for a total of six users in programming mode simultaneously. However, the two
phone programming users do not show up in session management in WebPro.
PCPro can be logged in only with one user. This is only allowed if no other users are

logged into programming mode (PCPro, WebPro, or Phone). Also, if a user is connected to
the switch via PCPro, no other user can log in through PCPro, WebPro, or Phone
Programming.
Programming from a Multiline Terminal can require a password to enter programming.

Temporary License can be activated only from a Multiline Terminal, not PCPro or WebPro.

When activated, the system is temporarily licensed for ACD, CTI, Firmware Upgrade, Hotel,

256 MEGACO stations, and SMDR.
Each time the temporary license is activated, the program is read only until the temporary

license expires.
Each time the temporary license expires, it can be set again for up to 10 additional days.

Programming from a Multiline Terminal
Document Revision 4C
2 - 819