NEC Electra Elite IPK II System User Manual page 506

Document Revision 4C
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Programming

15-02-08 Multiline Telephone Basic Data Setup – Automatic Handsfree
Set whether pressing a key accesses a One-Touch Key (1) or preselects the key (0).

15-02-16 Multiline Telephone Basic Data Setup – Handsfree Operation
Enable (1)/Disable (0) an extension user ability to use the speakerphone on outside calls. When
disabled, users can hear the conversion, but cannot respond handsfree.

20-06-01 Class of Service for Extensions
Assign Class of Service (1~15) for extensions.

20-02-12 System Options for Multiline Telephones – Forced Intercom Ring (ICM Call Type)
Enable (1)/Disable (0) Forced Intercom Ringing. If enabled, incoming Intercom calls normally
ring. If disabled, Intercom calls voice-announce.

20-09-05 Class of Service Options (Incoming Call Service) – Signal/Voice Call
Allow (1)/Prevent (0) an extension user from enabling Handsfree Answerback or Forced
Intercom Ringing for their incoming intercom calls.
Related Features
Central Office Calls, Answering
Central Office Calls, Placing
Microphone Cutoff
Prime Line Selection
2 - 482
Electra Elite IPK II
Handsfree and Monitor