NEC Electra Elite IPK II System User Manual page 309

Electra Elite IPK II

22-07-01 DIL Assignment
For each trunk assigned Service Type 4 in PRG 22-02-01 above, assign the DIL destination as
the Department Group pilot number (as assigned in Program 11-07-01).
Department: Groups 1~64

24-02-05 System Options for Transfer – Message Wait Ring Interval Time
For SLTs without Message waiting lamps, this is the time between intermittent ringing. If the
time is set to 0, the system rings once (0~64800 seconds). (default: 30).

24-02-08 System Options for Transfer – Delayed Transfer Timer for All Department Groups
Determine the time a call should ring a Department Group before transferring the call
(0~64800 seconds). (default: 10).

24-05-01 Department Group Transfer Target Setup
Assign the Speed Dial bin to each Department Group to hold the destination for the immediate
automatic transfer of ICM and transferred calls to the Department Group feature.
Operation
To call a department group:
1. Go off-hook.
2. Dial department's extension number.
The system routes the call to the first free telephone in the department group.

3. Optional: To manually ring all members of the group, dial the single digit service code assigned for
All Member Ring (Program 11-16-10).
To log out of your Department Calling Group:
 While you are logged out, Department Calling cannot route calls to your extension.
1. Press Speaker.
2. Dial 650 + 1.
- OR -
Press Department Calling Log In key (PRG 15-07-01 or SC 751: 46).
The key lights while you are logged out.

To log back in to your Department Calling Group:
 When you log back in, Department Calling will route calls to your extension.
1. Press Speaker.
Department Calling
Document Revision 4C
2 - 285