NEC Electra Elite IPK II System User Manual page 170

Document Revision 4C
Default Setting
Park and Page is available at default for internal paging access code 701, zone 1.

Use access code of 713. See feature Operation. Set PRG 40-10-01 for VRS guidance

message.
System Availability
Terminals
None
Required Component(s)
Voice Response System (VRS) card and DSPII-U10 Unit
Related Features
Analog Communication Interface (ACI)
Music on Hold
Programming

11-11-58 Service Code Setup (for Setup/Entry Operation) – Call Forward with Personal Greeting
Call forward with Personal greeting VRS. Service code setup. Default set to 713.

11-12-19 Service Code Setup (for Service Access) – Internal Group Paging
Service code setup. Default set to 701.

11-12-20 Service Code Setup (for Service Access) – External Paging
External paging access code. Service code setup. Default set to 703.

11-12-24 Service Code Setup (for Service Access) – Combined Paging
Combined paging, internal/external access code. Service code setup. Default set to

20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.

31-02-01 Internal Paging Group Assignment – Internal Paging Group Number
Assign extensions to Internal Paging Groups (i.e., Page Zones).
2 - 146
Electra Elite IPK II
Call Forwarding – Park and Page
1.
