NEC N8800-162F User Manual page 187

5. Select [File Path Update], and select the [Execute]. File path cannot be modified by the path
(/etc/opt/ft/BIOS.ROM) in procedure 1. Perform the firmware update.
TIPS: No state changes when the firmware is not correctly updated. Please confirm whether
the update file on the server is correctly stored in "/etc/opt/ft/BIOS.ROM".
"Copy Online To Offline" does not support it.
A module starts after copying it in Offline side from Online side by starting a
stopping module.
6. After the BIOS for a single CPU module is completed, select the <Change>.
The module completely updated is started and the module under operation is stopped.
7. Start the other module stopped.
Starting the module causes the firmware to be updated automatically.
However, if failed automatically of update, update the module in the procedure as 3 to 5.
Sample screen of ft server utility
[CPU Module]
Installing and Using Utilities 5-51