Table of Contents
Advertisement
11.
Install a Riser Card on the motherboard
and secure it with three screws.
12.
Install the stopper and secure it with
one screw.
13.
Refer to page 8-15 and install the CPU/IO module.
14.
Plug the power cord.
15.
Press the power swtich and power on the server.
16.
Verify that there is no error message displayed at POST screen.
If there is one, write down the error message and refer to 7-4 for the list of error messages.
System Upgrade 8-37
Advertisement
Table of Contents
Troubleshooting
