NEC N8800-162F User Manual page 259

6.
Open the levers attached on both sides of
the socket of the DIMM to be removed. It
will be unlocked and the DIMM can be
removed.
7.
Attach the dummy memory module.
8.
Attach the air duct.
9.
Place the top cover of the CPU/IO module and secure it with three screws.
10.
Refer to page 8-12 and install the CPU/IO module.
11.
Connect the power cords.
12.
Press the POWER switch to power on the server.
13.
Verify that POST displays no error message.
If POST displays an error message, write it down and see the POST error message list on page
7-4.
System Upgrade 8-23