Standard Features - NEC N8800-162F User Manual

2-2 General Description

STANDARD FEATURES

The NEC Express5800/ft series is the server that has hardware for two servers.
High performance
Intel® Xeon® Processor
(2.00GHz/2.93GHz)
High-speed Ethernet interface
(1000Mbps/100Mbps/10Mbps supported)
High-speed disk access
(SAS (Serial Attached SCSI))
Expandability
Various IO optional slots
- PCI Express REV1.1 (4 lane)
2 slots (Low Profile)
- PCI Express REV2.0(4 lane)*
2 slots (Full Hight)
Large capacity memory supported
: Max 96 GB
USB supported
High-reliability
Memory monitoring feature (Correctable
error correction/ Uncorrectable error
detection)
Bus parity error detection
Error notification
BIOS password feature
Management Utilities
NEC ESMPRO
NEC DianaScope
Ready-to-use
Quick cableless connection: hard disk,
CPU/IO module
Fault-tolerant Feature
Redundant modules achieved within a
system
Higher hardware availability by isolation of
failed module
* For R320b-M4 only.
Various Features
Graphic accelerator "PILOT2" supported
Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D) Utility
Maintainability
Off-line Maintenance Utility
Easy and Fine Setup
NEC EXPRESSBUILDER
(system setup utility)
SETUP (BIOS setup utility)