NEC N8800-162F User Manual page 65

Use of Flash FDD
Please handle the Flash FDD while noting the following:
Do not turn off the server while the access LED of the Flash FDD is blinking. Turning off the
server at this time can cause a failure or data corruption.
The Flash FDD is a consumable. If the Flash FDD causes an error, use a new Flash FDD.
The Flash FDD cannot be connected by way of a USB hub. Directly connect the Flash FDD
to a USB connector of the server.
Before touching the Flash FDD, discharge static electricity from your body by touching a
nearby metal object(such as a doorknob or aluminum frame)
Do not disassemble the Flash FDD.
Do not apply a strong force to the Flash FDD.
Do not place the Flash FDD on the area where temperature rises (such as directly exposed to
sunlight or near a heater).
Do not handle the Flash FDD while eating, drinking, or smoking. Also, be careful not to get
thinner, alcohol, or other corrosive substances on the Flash FDD.
Do not use the floppy disk in a dusty place.
Be careful when connecting the Flash FDD to the server.
After using the Flash FDD, disconnect it from the server.
General Description 2-29