Remote Access; Remote Manual Log-In - Panasonic KX-TVM200 Operating Instructions Manual

Subscriber's Manual
3.4

Remote Access

You can call the VPS while outside and
log in to your mailbox in order to listen to
your messages. There are 2 ways to log
in to your mailbox remotely:
a) Automatic Log-in:
When logging in to your mailbox
remotely from a preprogrammed
outside telephone, you do not need to
enter any special commands or your
mailbox number. The VPS can
recognise the telephone number you
are calling from and therefore
determine you are the caller (see 5.16
Assigning Your Telephone Numbers
for Remote Automatic Log-in and Toll
Saver). This feature is not available
with certain PBXs and may be
disabled by the System Administrator
or System Manager for your mailbox.
b) Manual Log-in:
You need to enter the Voice Mail
Service Command [#6] followed by
[ ] and your mailbox number. Manual
Log-in is necessary when logging in
to your mailbox when Automatic Log-
in is not available with your PBX,
when your mailbox is not programmed
for Automatic Log-in, or when you are
calling from a telephone number not
programmed for Automatic Log-in.
24
Remote Automatic Log-in
1.
Call the VPS from the
preprogrammed outside telephone
number.
• Ask your System Administrator
or System Manager what
telephone number you should
dial in order to access the VPS
remotely.
2.
Password
• You can skip this step if your
mailbox has no password.
3.
to play back messages.
1
4.
Follow the prompts or select one of
the following as necessary.
to call an extension.
8
#
8
#
operator.
5.
when finished.
#
9
6.
Go on-hook.
Note
• This feature is only available with
Panasonic KX-T series PBXs using
APT or DPT Integration. For more
information, consult your System
Administrator or System Manager.

Remote Manual Log-in

1.
Call the VPS from an outside
telephone.
• Ask your System Administrator
or System Manager what
telephone number you should
dial in order to access the VPS
remotely.
2.
# 6
#
to call the
0