Logging In To And Configuring Your Mailbox; Logging In To Your Mailbox - Panasonic KX-TVM200 Operating Instructions Manual

Subscriber's Manual
Section 2
Logging in to and
Configuring Your
Mailbox
2.1 Logging in to Your
Mailbox
In order to access Subscriber Services
(to play messages, change mailbox
settings, etc.), you must first log in to your
mailbox. There are 2 ways to log in to your
mailbox:
a) Automatic Log-in:
When logging in to your mailbox from
your own extension, you do not need
to enter any special commands or
your mailbox number. This feature is
not available with certain PBXs and
may be disabled by the System
Administrator or System Manager for
your mailbox.
b) Manual Log-in:
You need to enter the Voice Mail
Service Command [#6] followed by
[ ] and your mailbox number. Manual
Log-in is necessary when logging in
to your mailbox using someone else's
extension, when Automatic Log-in is
not available with your PBX, or when
Automatic Log-in is not enabled for
your mailbox.
You will know that you have logged in
successfully because the VPS will
announce either the Main Menu of
Subscriber Services or the number of
new messages you have, or the VM Menu
will be displayed.
8
Automatic Log-in
1.
Go off-hook.
2.
Enter the extension number of the
VPS.
3.
Password
• You can skip this step if your
mailbox has no password.
Manual Log-in
1.
Go off-hook.
2.
Enter the extension number of the
VPS.
3.
# 6
4.
and your mailbox number.
5.
Password
• You can skip this step if your
mailbox has no password.
Note
• If Autoplay New Messages is enabled
for your mailbox, new messages will
be played back automatically each
time you log in to your mailbox. For
more information, consult your System
Administrator or System Manager.
• If the Subscriber Tutorial is enabled for
your mailbox, VPS prompts will guide
you through the mailbox configuration
process the first time you log in to your
mailbox (see 2.2 Subscriber Tutorial
(Easy Mailbox Configuration)).
#
#