Subscriber's Manual
6.
Go on-hook.
Changing Device Numbers
1.
Log in to your mailbox.
•
See 2.1 Logging in to Your
Mailbox if necessary.
2.
5
3.
Enter the desired device number
(1–3).
4.
to change the assigned
1
number.
•
To delete the assigned number,
press [3] then go on-hook to
finish.
5.
Enter the outside line access
number needed for making outside
calls.
•
To store an extension number,
simply enter the extension
number then continue from
step 7.
6.
Enter the outside telephone
number (including area code if
needed).
•
To insert a pause or special
command in the middle of the
telephone number, pause
momentarily while entering the
telephone number. The VPS
will announce a list of available
options, for example, "To insert
a pause, press [5]. Press [4] to
continue entering the
telephone number.".
•
If you insert a beeper (pager)
display command here, the
VPS will prompt callers to enter
their telephone numbers. Caller
telephone numbers can then
be sent to your beeper (pager).
46
3
This feature may be disabled
for your mailbox.
7.
to accept.
2
8.
if the assigned number is a
1
telephone number.
if the assigned number is a
2
beeper (pager) number.
9.
Go on-hook.
Note
•
If your PBX uses PRI lines, you may
need to enter [#] at the end of outside
telephone numbers. Consult your
System Administrator for more
information.