Table of Contents
Advertisement
D If your fax machine does not ask you automatically, after
the new cartridge has been inserted, you can reset the copy
counter in function 49 (see New cartridge).
D The cartridge cannot be refilled.
Easylink
Easylink is used in conjunction with additional devices con-
nected to the same telephone line (e.g. cordless phones). How-
ever, the additional phone must be set to dual-tone multi-fre-
quency method. If your telephone connection requires the
pulse dialling method, then you would need to briefly reset
your additional device to use it. For more information about
this, please see the user manual for your device.
Starting fax reception
When you answer a call on the fax machine and recognise
that it is a fax (you hear a beep or no sound), press START
and hang up. The fax will be received.
When you answer using an additional phone and it turns
out to be a fax, you can start the fax reception by pressing
*5 and then hang up. The fax machine will receive the fax.
Interrupt ringing
When you answer an additional phone and the fax machine
continues to ring, this means that the extension phone is con-
nected in parallel. You can interrupt the ringing of the fax
machine by pressing **.
Changing codes
Select Function 34 by pressing MENU, 34, and then OK.
Enter two different codes and confirm each code with OK.
Each code should begin with * or #.
D Please note that the three Easylink codes must be differ-
ent. Otherwise on the display appears
CODE NOT OK.
v Only change the specified codes *5 and **
v
v
v
v
if absolutely necessary!
Service code
Function 45 (Service code) is used to delete some or all of
your changes to the factory settings. This function enables
you to partially or fully reconfigure your device. It is especially
helpful if you have modified settings but find that your fax
machine does not respond as expected.
v
v Only use this function when absolutely necessary.
v
v
v
If you are satisfied with your changes to the factory settings
you should not use this function.
After deleting some or all of your custom settings please re-
run Easy Install.
22
The following codes are at your disposal:
Code No. 7117
This code erases all your modifications to the factory settings.
The fax machine will therefore react in exactly the same way
as on first installation.
Code No. 7140
When you enter this code, all your entered settings and data
will be erased, except for:
•
received fax messages
•
stored short dial numbers
•
stored telephone book numbers
•
your name
•
your telephone number
Example for using a service code:
1 Select MENU, 45 and press OK. Enter the service
code (7117 or 7140). Press OK.
2 With u you can select whether you really want to de-
lete your settings. Confirm with OK. Your fax machine
will be reset to its original configuration.
Care and
maintainance
Before opening the fax machine, make sure that you
are electrically discharged by e.g. touching the metal
housing of a grounded appliance, a water pipe or ra-
diator.
Cleaning the machine
Use a soft, fluff-free cloth lightly moistened with a little alco-
hol (96%). You can also use a special cloth for cleaning fax
machines, which is available on the market. Do not allow any
moisture to penetrate inside the device.
Clean the scanner glass
1 Open the operation panel by lifting in the middle. When
you hear a soft click, the panel is engaged.
Advertisement
Table of Contents
