Table of Contents
Advertisement
Separate sockets
(not in all countries)
You can connect additional devices to separate sockets on the
same line even if they are in different rooms.
Please note: If you connect additional devices to separate sock-
ets (e.g. in separate rooms) your intelligent fax switch cannot
control them (which means that your fax machine behaves
like any ordinary fax machine). For this reason e.g. call trans-
fer is not possible. Therefore we recommend you to connect
your additional devices to the same socket.
Easy Install
Using EASY INSTALL your fax machine will be configured
according to your local conditions.
1 Press w for at least two seconds. Your fax machine will
print one page. Pull out the page firmly and follow the
instructions.
2 Your fax machine will then guide you on the display through
the first settings such as your fax number and your name.
3 Afterwards you need to enter the current time and date.
Use the dial pad to enter the correct time and date. Con-
firm with OK.
ISDN connection
Your fax machine is not an ISDN fax (group 4), but an ana-
logue fax machine (group 3). Therefore it cannot be used di-
rectly on an ISDN connection. You will need an (analogue)
adapter or an ISDN connection for analogue devices. For fur-
ther information please refer to your ISDN instructions.
Private branch
exchange
Private branch exchange systems are very common in large
companies. ISDN connections are private branch exchanges
and are used very often in private households. To get a con-
nection from a private branch exchange to the public network
you have to dial a key to obtain the outside line.
1 Select function 15 by pressing MENU and then entering
the digits 15. Press OK.
2 You can switch on the PABX operation using u.
PABX:YES
PABX: NO
3 Then press OK.
4 Now enter the key that has to be pressed to obtain an
outside line.
This outside line access code must be obtained from the manu-
facturer. This is either 0, R R R R R (in some systems also described
as FLASH) or a number key.
5 Press OK.
6 Use u to select check: yes and press OK.
Your machine will then check that the outside line can be ob-
tained. If the check is successful, briefly appears: TEST OK
If the check is successful, briefly appears: TEST NOT OK
You will be asked to repeat the entry. Change the outside line
access code. If you have entered the correct code but the dis-
play nevertheless reads TEST NOT OK then delete the code
by pressing C.
D In case your PABX requires R R R R R to obtain an outside line
but it is still not possible to get through to the line, your
system might not be according to the most recent regula-
tions. Therefore some technical settings have to be changed
on your fax machine. Please refer to your Fax Call Centre
(you will find the telephone number on the back cover).
9
Advertisement
Table of Contents
