Chapter 2 Mmb Messages; Mmb Message List - Fujitsu PRIMEQUEST 2000 Series Message Reference

MMB Messages
CHAPTER 2
This chapter lists MMB messages by type. For details on how to open an MMB window, see 1.7 Basic
Operations in the Web-UI Window in the PRIMEQUEST 2000 Series User Interface Operating Instructions
(C122-E109EN).
2.1

MMB Message list

This chapter describes the messages of the system even log which is displayed in the MMB Web-UI. The
messages are arranged in the ascending order of the Event ID.
'$' represents the Wild card character.
The following Severity items indicate the severity of messages.
Error: Serious system problem
Warning: Event which is not necessarily serious, but will be a potential problem in future
Info: Notification event
Remarks
Even in a message that normally displays 'Info', High Severity would be displayed if the severity is high in
the same unit.
Example of 2C6F02FF:
If an FRU Communication Lost Error has already occurred in the FRU Sensor, 'Error' is displayed instead of
the normally displayed 'Info'.
'Error' 'Warning' messages are sent via REMCS, Mail, or SNMP trap.
Note that even if the severity is 'Info', the following messages are sent via REMCS or SNMP trap.
The following table shows if messages have been sent.
Event ID
C06F00FF
C06F01FF
C06F02FF
C06F05FF
C06F06FF
C06F07FF
C06F08FF
C06F09FF
C06F0AFF
C06F0BFF
C06F0CFF
TABLE 2.1 Messages sent even by Info
Message
Power Off
Power On In Progress
Reset
OS Running
OS Shutdown
Panic
Power Off In Progress
Fatal
Dumping
Halt
Stop Error
MMB Messages
Sent via REMCS Sent via SNMP trap
Not sent Sent
Not sent Sent
Not sent Sent
Not sent Sent
Not sent Sent
Sent Sent
Not sent Sent
Not sent Sent
Not sent Sent
Not sent Sent
Sent Sent
3
C122-E178-02EN