Table of Contents
Advertisement
The Configure Cross-subsystem Paths dialog box consists of:
•
Available Paths (Upper part of the dialog box)
The following three panes are displayed from the left,
– The left pane displays the external storage systems connected to the
local storage system.
– The middle pane displays external ports of the local storage system,
which connects to the external storage system that you clicked in the
left pane. One of the following icons is displayed for each port:
– The right pane displays WWN of the external storage system that the
port attribute is set to Target. The WWN which connects to the port that
you clicked in the middle pane is displayed out of the WWN of the
external storage system which you clicked in the left pane.
•
Port Discovery button (Upper right of the dialog box)
Allows you to update information displayed in the Available Paths or
display the information on all the external storage system connected to the
local storage system even without the mapping configuration. When you
click Port Discovery, the Port Discovery dialog box is displayed.
Figure 5-10
5-20
Hitachi Universal Storage Platform V/VM Universal Volume Manager User's Guide
–
Vendor: vendor name.
–
Product Name: product name.
–
Serial Number: serial number of the product.
–
Port: external port of the local storage system. One of the
following icons is displayed:
: Ports in the Standard mode.
: Ports in the Initiator/External MIX mode.
–
WWN: Identification number of the port in the external storage
system.
Port Discovery Dialog Box
Performing Universal Volume Manager Operations
Advertisement
Table of Contents
