Hitachi MK-96RD626-07 User Manual page 146

Mapping External Volumes (AddVolumeSetting Tag)
You can map external volumes to the local storage system by specifying a
spreadsheet that includes the AddVolumeSetting tag when you execute the
CFLSET command using the Storage Navigator CLI.
Write parameters required for mapping external volumes in the
AddVolumeSetting tag. Parameters must be written in a hierarchical structure
by using the "+" identifier. The following table shows the structure and
identifier of the parameters that can be set for the AddVolumeSetting tag.
Table 6-6
Layer
The first
layer
The second
layer
The third
layer
6-6 Using Spreadsheets for Universal Volume Manager Operations
Hitachi Universal Storage Platform V/VM Universal Volume Manager User's Guide
Structure and Identifier of AddVolumeSetting Tag Parameters
Identifier Content
None Information about
external volumes
and the primary
path
+, Information about
alternate paths
+,+, Information about
LDEVs
Description
This layer is required.
Specifies one row for each alternate path. Up to seven
rows can be specified. It is recommended that you
specify at least one alternate path.
Specifies one row for each LDEV. Up to 2,048 rows
can be specified. If you do not specify the third layer,
no LDEVs will be created.