Table of Contents
Advertisement
Connecting External Storage Systems
TagmaStore AMS/WMS Storage System
System Parameters for Connecting TagmaStore
AMS/WMS Storage System
The table below explains whether to specify system parameters when making
settings on ports on the TagmaStore AMS and WMS storage systems.
Note: When you connect a TagmaStore AMS or WMS storage system, use LUN
Manager to set the data transfer speed of the external port which you use to a
fixed value other than the Auto. Also, set the data transfer speed of the target
port of the AMS/WMS storage system to the fixed value according to the data
transfer speed of the external port.
Table A-1
Window Names
Boot Options
Hitachi Universal Storage Platform V/VM Universal Volume Manager User's Guide
System Parameter Settings (AMS/WMS)
Parameters
Start Attribute
Single Mode
Dual Active Mode
Delay Planned Shutdown
Drive blocking mode
Vendor ID
Product ID
ROM Microprogram Version
Connecting External Storage Systems
Parameter Settings
Specify this parameter when AMS/WMS storage
system is in the one controller configuration.
Specify this parameter when AMS/WMS storage
system is in the two controller configuration.
You can either specify this parameter or omit
specifying this parameter.
You can either specify this parameter or omit
specifying this parameter.
Keep this parameter as HITACHI (default), and do
not change.
Keep this parameter as DF600F (default), and do
not change.
You can either specify this parameter or omit
specifying this parameter.
A
A-1
Advertisement
Table of Contents
