Table of Contents
Advertisement
Error
The Disconnect
Subsystem
command or the
Disconnect
Volume
command is
executed, but
the progress
status
information is
not updated.
The message of
"INTERVENTION
REQUIRED" is
issued to the
mainframe host
as the device
status.
The message of
"DEVICE ERROR"
is issued to the
mainframe host
as the device
status.
Calling the Hitachi Data Systems Support Center
If you need to call the Hitachi Data Systems Support Center, make sure to
provide as much information about the problem as possible, including:
•
The circumstances surrounding the error or failure.
•
The exact content of any error messages displayed on the host system(s).
•
The exact content of any error messages displayed by Storage Navigator.
•
The Storage Navigator configuration information (use the FD Dump Tool).
•
The service information messages (SIMs), including reference codes and
severity levels, displayed by Storage Navigator.
The Hitachi Data Systems customer support staff is available 24 hours/day,
seven days a week. If you need technical support, please call:
•
United States: (800) 446-0744
•
Outside the United States: (858) 547-4526
8-6
Hitachi Universal Storage Platform V/VM Universal Volume Manager User's Guide
Click Refresh (
) command on the Storage Navigator main window while the
Status: Enable button is displayed. If the progress information about the Cache
Destage status is not updated even though you have updated the information, call
the Hitachi Data Systems Support Center.
Note: The time required for the writing processing of data from the cache to the
external volume (destaging processing) depends on the volume capacity (more
time is required for the larger volume than the smaller one). The processing speed
is about 20 MB/s. However, the processing speed depends on the performance and
the status of the external storage system.
The device status is currently changing. Please wait for a while, and then check the
device status again. When the transition of the device status has completed
normally, the device can be used immediately. If the device is blocked as a result
of the device status transition, see the error description "The external volume is
blocked." in Table 8-1 for the corrective action.
See the error description "The external volume is blocked." in Table 8-1 for the
corrective action.
Troubleshooting
Corrective Action
Advertisement
Table of Contents
