Table of Contents
Advertisement
Open-system Host 1
System 1
- MCU
- Local Storage System
Legend
Figure 7-3
Procedure to Use Initiator/External MIX Mode
This section describes the procedure to use the Initiator/External MIX mode
and the procedure to stop using the Initiator/External MIX mode.
To use the Initiator/External MIX mode:
1. Prepare the initiator ports of the Standard mode and external ports of the
Standard mode in one port block.
For procedure to set the port attribute to initiator, see the TrueCopy User's
Guide or the Universal Replicator User's Guide.
2. Set the Initiator/External MIX mode to the port block consisting of the
initiator ports of the Standard mode and external ports of the Standard
mode.
7-8
Hitachi Universal Storage Platform V/VM Universal Volume Manager User's Guide
CCI
Target
Port
Initiator/External
P-VOL
: Remote command device
: Command device
: Logical device
: Lines showing the concept of mapping
Example of Using TrueCopy or Universal Replicator with
Remote Command Device
Remote Command Devices
LAN
System 2
- RCU
- External Storage System
Port of
MIX Mode
TrueCopy or Universal Replicator Pair
Open-system Host 2
CCI
Target
Port
RCU Target
Port
S-VOL
Advertisement
Table of Contents
