Thunder 9500V Storage System; System Parameters For Connecting Thunder 9500V - Hitachi MK-96RD626-07 User Manual

Thunder 9500V Storage System

System Parameters for Connecting Thunder 9500V

The table below explains whether to specify system parameters when making
settings on ports on the Thunder 9500V storage system.
Table A-5
Window Names
System Startup
Settings
Common 1
OPTION 1
OPTION 2
Data Striping
Inquiry Setting
Port Type
Hitachi Universal Storage Platform V/VM Universal Volume Manager User's Guide
System Parameter Settings (9500V)
Parameters
Start Attribute
Single Mode
Dual Active Mode
Hot Stand-By Mode
Delay Planned Shutdown
SCSI Fibre Channel Common
Options
SCSI Fibre Channel Common
Options
Operation if the processor
failure occurs
Command Queuing Mode
Vendor ID
Product ID
ROM Microprogram Version
RAM Microprogram Version
WEB Title
Reset/LIP Mode
Reset/LIP Mode (Signal)
Reset/LIP Mode (Process)
Connecting External Storage Systems
Parameter Settings
Specify this parameter when Thunder 9500V
storage system is in the one controller
configuration.
Specify this parameter when Thunder 9500V
storage system is in the two controller
configuration.
Note: Be sure to specify that Data Share
Mode will be used.
Do not specify this parameter.
You can either specify this parameter or
omit specifying this parameter.
You can either specify this parameter or
omit specifying this parameter.
You can either specify this parameter or
omit specifying this parameter.
Specify this parameter to Reset of occurred.
Specify this parameter ON.
Keep this parameter as HITACHI (default),
and do not change.
Keep this parameter as DF600F (default),
and do not change.
You can either specify this parameter or
omit specifying this parameter.
You can either specify this parameter or
omit specifying this parameter.
You can either specify this parameter or
omit specifying this parameter.
You can either specify this parameter or
omit specifying this parameter.
You can either specify this parameter or
omit specifying this parameter.
A-5